Обновление MikroTik RouterOS v6.46

Производитель MikroTik обновил операционную систему RouterOS до версии 6.46.

Прошивку RouterOS версии 6.46 можно скачать с сайта http://www.mikrotik.com/download.html

В версии 6.46 сделаны следующие улучшения и исправления (2 декабря 2019 г.):

Важные изменения:

• ! lora - added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM;
• ! package - accept only packages with original filenames (CVE-2019-3976);
• ! package - improved package signature verification (CVE-2019-3977);
• ! security - fixed improper handling of DNS responses (CVE-2019-3978, CVE-2019-3979).

Остальные изменения в этом релизе:

• backup - fixed automatic backup file generation when configuration reset by button;
• backup - store automatically created backup file in "flash" directory;
• bonding - correctly remove HW offloaded bonding with ARP monitoring;
• bonding - properly handle MAC addresses when bonding WLAN interfaces;
• bridge - disable/enable bridge port when setting bpdu-guard;
• bridge - do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
• bridge - do not add dynamically VLAN entry when changing "pvid" property for non-vlan aware bridge;
• bridge - include whole VLAN-id in DHCP Option 82 message;
• btest - removed duplicate "duration" parameter;
• capsman - fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
• capsman - fixed channel auto reselection;
• capsman - fixed MAC address detection for "common-name" parameter in certificate requests;
• capsman - improved DFS channel switching when radar detected;
• capsman - improved radar detection algorithm;
• ccr - improved general system stability;
• certificate - added progress bar when creating certificate request;
• certificate - added support for certificate request signing with EC keys;
• certificate - allow specifying "file-name" parameter for export (CLI only);
• certificate - allow specifying "name" parameter for import (CLI only);
• certificate - improved CRL updating process;
• certificate - removed "key-size" parameter for "create-certificate-request" command;
• chr - added support for Azure guest agent;
• console - added bitwise operator support for "ip6" data type;
• console - fixed "address" column width when printing DHCPv4 leases;
• console - fixed IP conversion to "num" data type;
• console - fixed "tobool" conversion;
• console - properly detect IPv6 address as "ip6" data type;
• crs1xx/2xx - allow to set trunk port as mirroring target;
• crs3xx - correctly handle L2MTU change;
• crs3xx - do not send pause frames when ethernet "tx-flow-control" is disabled on CRS326/CRS328/CRS305 devices;
• crs3xx - improved interface initialization;
• crs3xx - improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
• crs3xx - improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
• crs3xx - remove previously set mirror-source property before changing it;
• defconf - fixed default configuration loading on RBmAPL-2nD (introduced in v6.45);
• defconf - require "policy" permission to print default configuration;
• dhcpv4-client - allow empty "dhcp-options" parameter when adding new client;
• dhcpv4-client - fixed "dhcp-options" parameter setting when adding new client;
• dhcpv4-server - improved stability when RADIUS Interim update is sent;
• dhcpv6-client - fixed timeout when doing rebind;
• dhcpv6-client - properly update bind time when unused prefix received from the server;
• dhcpv6-client - properly update IPv6 address on rebind;
• dhcpv6-server - fixed logged error message when using "address-pool=static-only";
• dhcpv6-server - ignore prefix-hint from client's DHCPDISCOVER if static prefix received from RADIUS;
• dhcpv6-server - include "User-Name" parameter in accounting requests;
• dhcpv6-server - made "calling-station-id" contain MAC address if DUID contains it;
• dot1x - added "reject-vlan-id" server parameter (CLI only);
• dot1x - added support for dynamic switch rules from RADIUS;
• dot1x - added support for "mac-auth" authentication type (CLI only);
• ethernet - automatically detect interface when using IP address for power-cycle-ping;
• ethernet - do not enable interface after reboot that is already disabled;
• ethernet - send requests only from ethernet interface when using MAC address for power-cycle-ping;
• export - always export "ssid" value for w60g interfaces;
• fetch - do not allocate extra 500KiB on SMIPS;
• fetch - improved stability when processing large output data;
• gps - use "serial1" as default port on RBLtAP-2HnD;
• hotspot - fixed non-local NAT redirection to port TCP/64873;
• hotspot - fixed RADIUS CoA "address-list" update;
• ike1 - fixed minor spelling mistake in logs;
• ike2 - improved CHILD SA rekey process with Apple iOS 13;
• ike2 - improved stability when retransmitting first packet as responder;
• ipsec - added "error" topic for identity check failure logging messages;
• ipsec - fixed DNS resolving when domain has only AAAA entries;
• ipsec - fixed policy "sa-src-address" detection from "local-address" (introduced in v6.45);
• ipv6 - changed "advertise-dns" default value to "yes";
• led - fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
• log - increased log message length limit to 1024 characters;
• lte - added support for D402 modem;
• lte - added support for LM960A18;
• lte - added support for Telit LM960 and LE910C1 modems;
• lte - do not allow setting 3G and GSM modes on LTE only modems;
• lte - fixed band setting on R11e-4G;
• lte - fixed network registration on R11e-LTE-US;
• lte - fixed Sierra WP7601 driver loading;
• lte - fix "operator" names not being displayed properly;
• lte - improved modem initialization;
• lte - show "primary-band" only for LTE modems;
• lte - use /128 prefix for IPv6 address on LTE interface;
• lte - use interface from RA when "ipv6-interface=none" and IPv6 enabled;
• ppp - added 3GPP IoT "access-technology" definitions;
• ppp - added support for Sierra WP7601;
• ppp - disable DTR send when using at-chat;
• quickset - added "LTE AP Dual" mode support;
• quickset - added "LTE APN" dropdown support;
• quickset - fixed "LTE Band" checkbox display;
• route - fixed area range summary route installation in VRF;
• routerboard - fixed default CPU frequency on RB750r2 ("/system routerboard upgrade" required);
• routerboard - fixed USB configuration export on RBLtAP-2HnD;
• routerboard - hide "memory-frequency" parameter for RBLtAP-2HnD;
• sniffer - allow filtering by packet size;
• snmp - added "disabled" and "comment" parameters for communities;
• snmp - added option to monitor "link-downs" parameter using MIKROTIK-MIB;
• snmp - fixed "dot1dBasePort" index offset for BRIDGE-MIB;
• snmp - fixed "ifLastChange" OID reporting for IF-MIB;
• snmp - fixed "radio-name" (mtxrWlRtabRadioName) OID support;
• snmp - improved interface status reporting for IfOperStatus OID;
• snmp - improved LLDP interface returned index and type;
• snmp - return only interfaces with MAC addresses for LLDP;
• snmp - use "src-address" also for traps;
• ssh - fixed output printing when "command" parameter used;
• supout - include information from all LTE interfaces;
• supout - removed "file" option from "/system sup-output" command;
• switch - added "comment" property for switch vlan menu (CLI only);
• switch - correctly update dynamic switch rule when dhcp-snooping is enabled;
• switch - ignore "default-vlan-id" property after switch reset on RTL8367 switch chip;
• switch - show "external" flag for bridge hosts on MT7621, RTL8367 switch chips;
• timezone - updated time zone database to version 2019c;
• tr069-client - added CellDiagnostics parameter support;
• tr069-client - added LTE band and cellular technology selection parameters;
• tr069-client - added LTE RSCP, ECNO and ICCID parameter support;
• tr069-client - added multiple LTE monitoring parameters;
• tr069-client - reconnect to ACS when "ConnectionRequestURL" is updated;
• upgrade - improved auto package updating using "check-for-updates";
• ups - improved compatibility with APC UPS's;
• usb - general USB modem stability improvements;
• userman - updated Authorize.Net to use SHA512 hashing;
• w60g - added "region" setting to limit allowed frequencies (CLI only);
• w60g - do not reset link when changing comment on station;
• w60g - fixed "monitor" command on disabled interfaces;
• w60g - move stations to new bridge when "put-in-bridge" parameter is changed;
• webfig - fixed link to Winbox download;
• winbox - added "ip-address" and stats columns in "IP/Kid-Control/Devices" menu;
• winbox - added "public-address-ipv6" parameter to "IP/Cloud" menu;
• winbox - added "reset-counters" button to "IP/Kid Control/Devices" menu;
• winbox - added "tx-info-field" parameter to "Wireless/W60G" menu;
• winbox - added "Vendor Classes" tab in "IP/DHCP Server" menu;
• winbox - added wireless alignment LED types to "System/LEDs" menu;
• winbox - fixed allowed range for bridge filter "new-priority" parameter;
• winbox - fixed "CAPs Scanner" stopping;
• winbox - fixed "cluster-id" parameter setting in "Routing/BGP/Instances" menu;
• winbox - fixed file locking when uploading multiple files at once;
• winbox - fixed firewall limit parameter support for rates more than 4G;
• winbox - fixed invalid flag presence in "IP/SMB/Shares" menu;
• winbox - fixed "Routing" menu icon presence when there is no routing package installed;
• winbox - improved stability when transfering multiple files between multiple windows;
• winbox - properly show timestamp in file "Creation Time" field;
• winbox - removed "Set CA Passphrase" button from "Certificate" menu;
• winbox - renamed "Queue Limit" to "Queue Size" for "pcq-upload-default" and "pcq-download-default" parameters;
• winbox - replaced "kb" with "KiB" in "Tools/Packet Sniffer" menu;
• winbox - show "Switch" menu on RBwAPGR-5HacD2HnD;
• winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
• wireless - added 4 chain MCS support for 802.11n wireless protocol (CLI only);
• wireless - added "ETSI" regulatory domain information;
• wireless - added "indonesia4" regulatory domain information;
• wireless - added "push-button-5s" value for "wps-mode" parameter;
• wireless - added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
• wireless - allow using "canada2" regulatory domain on US lock devices;
• wireless - fixed 802.11n rate selection when managed by CAPsMAN;
• wireless - fixed RX chain selection;
• wireless - fixed sensor MAC address reporting in TZSP header;
• wireless - improved 802.11ac stability for all ARM devices with wireless;
• wireless - improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
• wireless - updated "ukraine" regulatory domain information;
• wireless - updated "united-states" regulatory domain information.